What to Know About Broyhill Furniture Replacement Parts and Hardware

What to Know About Broyhill Furniture Replacement Parts and Hardware

Over time, even the most carefully crafted furniture can need a little TLC — a drawer glide wears down, a knob loosens, or a bracket bends. Knowing how to find authentic Broyhill furniture replacement parts and compatible hardware helps you restore your investment without replacing the entire piece.

We’ve spent decades building collections like our bedroom furniture and living room pieces to last, and we designed many models with serviceability in mind. This guide walks you through the process of identifying the parts you need, sourcing them correctly, and understanding what options exist when original components are unavailable.

Identifying the Correct Part for Your Broyhill Piece

Start by locating the model and serial number tag, usually stapled to the back panel, inside a drawer, or underneath the furniture. That code tells you which collection the piece belongs to and which year it was manufactured — critical details when ordering parts.

If the tag is missing or illegible, measure the existing hardware carefully: screw spacing (center-to-center distance), knob diameter, drawer-glide length, and any visible mounting-plate dimensions. Photograph the part from multiple angles, including close-ups of any stamped numbers or logos. Many components are standard sizes shared across several collections, but confirming dimensions prevents ordering the wrong item.

For older or discontinued lines, such as the Fontana bedroom set, original hardware may no longer be stocked. In those cases, universal aftermarket parts sized to match your measurements often work perfectly.

Where to Source Authentic and Compatible Hardware

Authorized Broyhill retailers and our customer service team can check current inventory for in-production collections. If your piece was manufactured within the past ten years and belongs to an active line, there’s a good chance the exact part is still available.

For vintage or discontinued furniture, aftermarket suppliers specializing in cabinet hardware, drawer glides, and upholstery components carry universal replacements. Match the mounting style (screw-on, clip-in, press-fit) and dimensions first, then choose a finish that complements your piece.

When Original Parts Are No Longer Manufactured

Some collections, like Attic Heirlooms, feature distinctive pulls and finishes that may not have direct modern equivalents. In these situations, refinishing or re-plating existing hardware or selecting a complementary aftermarket style preserves the furniture’s character. A furniture restoration specialist can recommend metal finishes and profiles that blend with the original design language.

Understanding Material Compatibility

Hardware materials affect both appearance and durability. Solid brass knobs resist tarnish better than plated steel but cost more; zinc alloy offers a middle ground. Drawer glides come in ball-bearing, roller, or epoxy-coated steel varieties, each with different weight capacities and extension lengths.

When replacing upholstery components — springs, webbing, or edge-wire — fabric type also matters. Our furniture fabric guide explains which materials pair best with different frame styles and usage patterns. Matching the original weave and weight keeps the seat or cushion structure intact.

Fastener thread pitch must align with existing pilot holes. Fine-thread screws strip less easily in hardwood, but coarse threads hold better in particleboard or MDF components. Bring the old screw to a hardware store if unsure which pitch you need.

Understanding Material Compatibility

DIY Replacement vs. Professional Repair

Simple swaps — knobs, pulls, felt pads — require only a screwdriver and five minutes. Drawer glides and bracket assemblies are straightforward if you follow the manufacturer’s installation sheet and have a power drill.

Structural repairs — replacing split mortise-and-tenon joints, regluing veneers, or rebuilding a drawer box — call for woodworking tools and experience. Attempting these without proper clamps or joinery knowledge can worsen the damage. A local furniture repair technician can assess whether a repair is cost-effective or if replacement makes more sense.

Upholstery work almost always benefits from professional hands. Springs, webbing, and padding layers must be tensioned evenly to prevent sagging or uneven wear. If you’re comfortable with basic sewing, you can re-cover a slip seat or cushion, but frame reupholstery is a different skill set entirely.

Keeping Your Broyhill Furniture in Service

Sourcing the right replacement parts and hardware extends the life of furniture you’ve invested in and preserves the comfort and style you chose it for. Whether you need a single drawer pull or a full set of glides, taking the time to identify compatible components ensures a repair that lasts.

When original parts aren’t available, aftermarket alternatives and skilled restoration work offer practical solutions that respect the furniture’s design. With the right information and a bit of patience, most repairs are straightforward — and far more economical than starting over.

Notes

Yes, as long as the mounting dimensions and screw spacing match your original hardware. Measure carefully and choose a finish that complements the piece. Generic components work especially well for drawer glides, corner brackets, and standard-size knobs.

Contact our customer service team with the model number to check archived inventory. If original parts are unavailable, aftermarket suppliers often carry compatible hardware. Furniture restoration specialists can also fabricate custom components or recommend close-match alternatives.

Provide the model and serial number from the furniture tag, a description of the part needed, and measurements including screw spacing and overall dimensions. Clear photos showing the part from multiple angles help ensure you receive the correct component.

Not always. Drawer glide length and mounting style vary by model and year. Measure the existing glide from front mounting hole to rear mounting hole, and note whether it’s a side-mount or under-mount design. Many standard lengths are interchangeable if the mount type matches.

Minor cosmetic repairs like filling small chips or regluing a loose trim piece are manageable with wood filler and clamps. Structural components — drawer fronts, frame rails, leg assemblies — require woodworking tools and joinery skills. A professional repair ensures proper fit and finish without risking further damage.

Lead times depend on whether the part is in stock or must be special-ordered. In-stock items typically ship within a few business days. Discontinued or custom-fabricated parts may take several weeks. Ordering aftermarket components directly from hardware suppliers is often faster for older collections.